Minelab E-TRAC Specification
Application - Coin, Relic, Jewellery & Beach
Technology - FBS, Smartfind
Frequency/Transmission - Multiple frequencies: 1.5 - 100kHz
Coil (standard) - 11" Double-D lightweight, waterproof.
Audio Output - Internal speaker & 6.35mm ( 1/4") headphone jack.
Headphones Supplied - Koss 100 ohm headphones.
Visual Display - Very large 72mm x 48mm (2.8" x 1.9") greyscale LCD with contrast adjustment.
Backlight - Yes.
Product ID - 754
USB Connectivity - USB connector for communication with PC.
Memory - Settings saved automatically while detecting and remain until changed or reset.
Depth Indication - Accurate gauge active in normal detecting and Pinpoint mode.
Detect Modes - 4 pre-programmed user Modes (Coins, High Trash, Beach and Relics) and 4 user customisable Modes.
Discrimination - SmartfindTM 2 dimensional Discrimination: Ferrous 35, Conductivity 50. 10 discrimination patterns (Coins, All-Metal, Fe Coins, Jewellery, Foil, Pull Tab, Iron, Crowncap, Screwcap & Nail) & 10 user slots.
Audio tone - 1,2,4 & Multi-tone; customizable for conductivity or ferrous response. Variable by 30 adjustable steps.
Audio Type - Normal, Long, Smooth & Pitch Hold.
Ground Balance - Automatic ground compensation - advanced digital filtering. Ground settings Neutral & Difficult.
Ground Balance Type -
Trash Density - (2) Low & High.
Pinpoint - Non-motion with modulated audio and visual crosshair on LCD, 2 modes: normal and sizing.
Sensitivity Adjust - Fully automatic with adjustable offset, manual setting 1 to 30.
Tune / Noise Cancel - Manual & Automatic (11 channels)
Threshold - Finer adjustment level from 0 to 50.
Target Volume Adjust - Limit & Gain (1 to 30).
Battery - 1600mAh NiMH or alkaline batteries.
Low battery alert - Audio & visual indication.
Length - 1060mm -1380mm (41.7" - 54.3").
Weight - 1.6kg (3.5lbs) (ex. battery).
Warranty - 3 years control box & coil.